Tone Generator \u0026 Probe Kit
Tone Generator u0026 Probe Kit
 |
No items matching your keywords were found.
|
|
TRACETone Tone Generator & Amplifier Probe - Network cable testing kit $73.99 IDEAL TRACETone Tone Generator & Amplifier Probe - Network cable testing kit |
|
|
Fluke Networks / PRO 3000 Tone Generator with Probe Kit / 26000-900 $88.96 Fluke Networks - PRO 3000 Tone Generator with Probe Kit - 26000-900 |
|
|
IDEAL Tone Generator and Amplifier Probe Kit $90.99 1 x F Connector 1 x RJ-45 33-864 9 volt battery included for both Tone Generator and Amplifier Probe Amplifier Probe: Battery low indicator Tone Generator: Three different tones Low battery LED indicates when to change battery Amplifier Probe: To identify and trace wires or cables within a group without damaging the insulation Tone Generator: To identify a wire within a bundle, at a cross connect or at a remote end F-Connector port for toning & tracing coaxial CATV cabling systems Tone Generator and Amplifier Probe Kit include Tone generator and Amlifier probe.The Amplifier Probe is designed to identify and trace wires or cables within a group without damaging the insulation and tone generator to apply a tone signal to a wire pair or single conductor, and trace with an amplifier probe. Coaxial IDEAL IDEAL Industries, Inc Network Testing Device Tone Generator and Amplifier Probe Kit Tone Generator and Amplifier Probe Kit Includes: Amplifier Probe Tone Generator Lead Set Cable Assembly Soft Black Pouch Twisted Pair www.idealindustries.com |
|
|
Ideal 33864 Tone Generator Amplifier Probe Kit $154.42 Ports: 1 x RJ45 1 x F Connector.Status Indicators. Amplifier Probe: Battery low indicator. Tone Generator: Three different tones Low battery LED indicates when to change battery.Media and Performance. Connectivity Media: Twisted Pair Coaxial.Technical Information. Test Services. Amplifier probe: To identify and trace wires or cables within a group without damaging the insulation. Tone Generator: To identify a wire within a bundle at a cross connect or at a remote end FConnector port for toning and tracing coaxial CATV cabling systems. |
|
|
Fluke PRO 3000 Tone Generator with Probe Kit. Each $82.44 Manufacturer: Fluke Networks. Each. PRO 3000 Tone Generator with Probe Kit Harris PRO3000 Tone Probe Kit 18 month warranty Requires one 9 volt battery in each product to operate (not included) "Works on virtually any cable or wire" Cat 3/5/5e/6 etc. Coax |
|
|
NetTone Network Tone and Probe $288.99 The kit includes a tone generator to transmit a trace tone and a probe to detect a tone signal. It uses link light activation to help you identify port assignments |
|
|
Cables To Go / Tone Generator and Probe / 26844 $90.28 Cables To Go - Tone Generator and Probe - 26844 |
|
|
Cables To Go Tone Generator & Probe 26844 $96.61 Cables To Go Tone Generator & Probe 26844 |
|
|
Greenlee 801K Premium Tone/Probe Kit $272.03 Premium Tone/Probe Kit with 77HP/6A tone generator with bedofnails clips 200FP Filter Probe eliminates electrical interference has speaker bypass when connected to butt set. |
|
|
IDEAL TRACETone Tone Generator & Amplifier Probe - network cable testing kit. Each $36.54 Manufacturer: Ideal Industries. Each. Product Type: Network cable testing kit Package Content (FJ): Patch cable, alligator clip Customers also search for: Discount IDEAL TRACETone Tone Generator & Amplifier Probe - network cable testing kit, Buy IDEAL TRA |
|
|
Ideal / TONE & PROBE KIT / 33-864 $117.8 Ideal - TONE & PROBE KIT - 33-864 |
|
|
Greenlee 60558 Tone & Probe Kit. Each $148.11 Manufacturer: Greenlee. Each. Use on single conductors, twisted pairs, coax cable and de-energized electrical wiring Includes = Carrying Case, 200GX Inductive Amplifier, 77GX Tone Generator Customers also search for: Discount 60558 Tone & Probe Kit, Buy |
|
|
Hc-26000-900 - Pro 3000 Tone Generator With Probe Kit $96.87 [HC-26000-900] UPC: 754082038917 12.25L x 7W x 3H 1.53 LB |
|
|
Cables To Go Tone Generator & Probe $83.99 26844 2-position switch for single tone or multi-tone signal Toggle switch to control 3 modes of operation Black and red testing leads and standard 4-Pin modular cable for individual wire tests or modular jack tests Special inductive plastic tip prevents accidental shorts (possible with copper-tip tracers) when using near high voltage devices Adjustable volume level for various work environments Both amplifier and LED for loud or dark work environments Power switch to prevent battery drain Convenient compact size and simple application 3-color LED indicator display for telephone line polarity, continuity and voltage testing Traces and identifies wires or cable in a bundle or group without damaging insulation The Tone Generator from Cables To Go is a highly practical network installation and trouble-shooting tool which features a single or multi-tone signal, two test leads and a 4-conductor modular cable. The signal emitted by the Tone Generator can be easily traced by the Probe, even when cables are in a bundle or hidden in a mess of punchdown blocks or wall plates. The Tone Generator and Probe can be used to verify cable continuity, identify wiring faults, determine line polarity and voltage in network (Cat5 and Coax) and modular telephone lines. The Probe is equipped with a tone amplifier and an LED indicator that detects audible frequency tones for accurate tracing and identification of wires. Cables To Go Network Testing Device Tone Generator & Probe www.cablestogo.com |
|
|
Grisoft / Premium Tone/Probe Kit / 801K $187.89 Grisoft - Premium Tone/Probe Kit - 801K |
|
|
Grisoft / Pro Tone/Probe Kit / 711K $137.63 Grisoft - Pro Tone/Probe Kit - 711K |
|
|
Cables To Go 26844 TONE GENERATOR and PROBE $109.84 The Tone Generator is a highly practical network installation and troubleshooting tool which features a single or multitone signal two test leads and a 4conductor modular cable. The signal emitted by the Tone Generator can be easily traced by the Probe even when cables are in a bundle or hidden in a mess of punch down blocks or wall plates. The Tone Generator and Probe can be used to verify cable continuity identify wiring faults determine line polarity and voltage in network (Cat 5 and Coax) and modular telephone lines. The Probe is equipped with a tone amplifier and an LED indicator that detects audible frequency tones for accurate tracing and identification of wires. Features: 2position switch for single tone or multitone signal. Toggle switch to control 3 modes of operation. 3color LED indicator display for telephone line polarity continuity and voltage testing. Black and red testing leads and standard 4pin modular cable for individual wire tests or modular jack tests. Special inductive plastic tip which prevents accidental shorts (possible with coppertip tracers) when using near high voltage devices. Traces and identifies wires or cable in a bundle or group without damaging cable insulation. Adjustable volume level for various work environments. Both amplifier and LED for loud or dark work environments. Power switch to prevent battery drain. Convenient compact size and simple application. |
|
|
IDEAL TRACETone Tone Generator and Amplified Probe Test Set $39.99 1 Year Limited 62-140 2 selectable tone styles Built-in volume control to meet personal preference Turn-on the Amplified Probe by contact and automatic power off mode whenTone Generator is in the stowed mode-no dead battery Voltage Without Damage: 250 volts peak DC or 175 volts RMS AC Tone frequencies (+/-5%): 995Hz and 845Hz alternating tones Tone voltage: 12 volts p-p no load, new battery Tone power: 8dbm into 600 ohms, new batter TRACETone Tone Generator and Amplified Probe Test Set Alligator Clip with RJ11 interface Satin RJ11 Patch Cord Power-on indicator Test continuity and located signal of installed wire and cable IDEAL IDEAL Industries, Inc LR44 Probe RJ-11 TRACETone TRACETone Tone Generator and Amplified Probe Test Set www.idealindustries.com |
|
|
Ideal 62164 Amplifier Probe with IDI62160 Tone Generator $82.47 WORKS WITH IDI62160 TONE GENERATOR TO IDENTIFY WIRES; VOLUME CONTROL FOR INCREASED SENSITIVITY; RECESSED ON/OFF BUTTON PREVENTS BATTERY DRAIN; FEATURES A LOW BATTERY INDICATOR; INCLUDES 9V BATTERY |
|
|
JDSU Tone Tracer Probe $52.99 1 Year Ergonomic shape, balanced weight Volume control Recessed "on" switch Tip replacement without opening case Lanyard attachment point Tone Tracer Probe Round probe tip Paddle-style probe tip 9-volt battery Battery-low indicator Tone Tracer Probe is an ergonomic, high-sensitivity probe for field service professionals. Used in conjunction with any analog tone generator, the Tone Tracer identifies wire and cable without having to make direct metallic contact with the conductor. The Tone Tracer Probe can be used with a wearable headset or a standard cell phone headset. Traces tone for cable identification and troubleshooting JDS Uniphase Corporation JDSU Probe TT100 Tone Tracer Probe www.jdsu.com |
|
|
IDEAL 62140 TRACETone Tone Generator and Amplifier Probe $52.29 Tests continuity and located signal of installed wire and cable. 2 selectable tone styles to meet personal preference. tone generator and amplifier. Includes rj11 alligator clip and rj11 cable assembly. Tags: tools hand tools and accessories installation tools and accessories. |
|
|
Pro3000 Analog Tone & Probe Kit - network tester kit $85.99 Fluke Pro3000 Analog Tone & Probe Kit - Network tester kit |
|
|
Tone Generator $37.99 IDEAL 62-160 TONE GENERATOR |
|
|
Security Test Kit $123.99 Security and Alarm Test Kit includes 200EP probe, PE620 Alarm Loop Verifier/Tone Generator. |
|
|
TRENDnet Net Probe (Amplified Inductor and Tone Probe) $44.99 1 Year 1 x RJ-45 Network 1 x Sub-mini phone Earphone Net Probe (Amplified Inductor and Tone Probe) RJ-11 Jumper Cable +/- Terminals for Butt Set or Alligator Clips Ring/Tip polarity test indicator Push Button for Easy Operation and Conserves Battery Power Lanyard Attachment for Quick Access to the Probe Used for Tone tracing and line testing When combined with a compatible Tone Generator, a technician can quickly locate, isolate and test commonly used voice and data cables swiftly and efficiently Detects AC or DC Power up to 24 Volts Identifies Analog Phone Jack polarity and verifies line functioning Personal Safety: Composite Tip Reduces the Risk of Getting Shock Sound Control Feature: Built-In Speaker with Adjustable Volume Compatible with Most Tone Generators TRENDnet TC-TP1 is an easy-to-use amplified inductor and tone probe that is used for tone tracing and line testing. The TC-TP1 features a simple push button that provides easy operation and conserves battery power. This ergonomically designed device comes with adjustable volume control and signal LED for enhanced accuracy in noisy environments. When combined with a compatible Tone Generator, a technician can quickly locate, isolate and test commonly used voice and data cables swiftly and efficiently. Tone Signal LED Indicator Net Probe (Amplified Inductor and Tone Probe) Probe TC-TP1 TRENDnet Twisted Pair www.trendnet.com |
|
|
Fluke Networks HC26000900 PRO 3000 Tone Generator with P $120.22 PRO 3000 Tone Generator with Probe Kit Harris PRO3000 Tone Probe Kit 18 month warranty Requires one 9 volt battery in each product to operate (not included) Works on virtually any cable or wire Cat 3/5/5e/6 etc. Coax Deenergized Electrical Wire Security Wire Speaker Wire Tones up to 10 miles on most cable Harris PRO3000 Tone and Probe Kit is THE professional kit you need for tracing and toning wire or cable. Use it on deenergized AC wire telephone/twisted pair wire all voice and data category rated cable all coax cable speaker wire security wire virtually and cable or wire All in a durable nylon pouch with three pockets and extra large belt loop. PRO3000 Probe (Top Features) Loud speaker amplifies tone trhough walls enclosure wood or plaster Easytouse adjustable volume control dial Quicktwist tip for easy replacement FREE Spare Tip inside PRO3000 Tone Generator (Top Features) SmartTone technology can generate five seperate tones External switch lets you select solid or alternating tone options indicated with solid or flashing LEDs Continuity testing Line polarity confirmation Line cord features Angled BedofNails clips and ruggedized RJ11 plug for direct access to phone and data jacks without adaptersHC26000900 |
|
|
Pro3000 Analog Tone Generator - tone generator $38.99 Fluke Pro3000 Analog Tone Generator - Tone generator |
|
|
Ideal / TONE GENERATOR / 62-160 $50.01 Ideal - TONE GENERATOR - 62-160 |
|
|
Shure A15TG Tone Generator $119.99 Shure A15TG Tone Generator |
|
|
Shure A15tg Tone Generator $119.99 Shure A15TG Tone Generator |
|
|
Valcom Tone Generator V9927A $103.48 Valcom Tone Generator V9927A |
|
|
Viking Tone Generator CTG1 $322.24 Viking Tone Generator CTG1 |
|
|
Tone Generator W/Truetrace $44.99 TONE GENERATOR W/TRUETRACE |
|
|
Tone &Amp; Probe Kit $186 Sla 12v 18ahupg 85977/d5745 sealed lead acid batteries (12v; 18 ah; ub12180). Specs: used in ups backup systems, spotlights, flashlights, exit lighting amp; other equipment; 12v; 18 ah; ub12180. Refurb: n. Returnable: y. Warranty: one year.... |
|
|
Greenlee 711K Cable Analyzer Kit $315.6 Pro Tone/Probe Kit |
|
|
Greenlee 801K Cable Ananlyzer Kit $430.73 Premium Tone/Probe Kit |
|
|
Pyrometer Probe $72.99 Pyrometer Probe; Street Series Probe Kit; |