Baintlinc Home Generators

Natural Gas Generator

Natural Gas Generators Go for the Win!

One of the many generators of today which are considered beneficial especially during a power interruption is the natural gas generator. It can provide electricity to those who will use it by burning natural gas. Even in your own household, you can use specific appliances during outages with the help of this kind of generator. For those who are already using natural gas as their source of electricity, the use of a generator that makes use of this kind of gas will be more beneficial because it can be directly connected. In comparison to other kinds of generators, you will find out what makes it distinct from the others.

When it comes to effectiveness and the safety it can provide to the environment, a natural gas generator set is far more better that a generator that makes use of coal. Coal can be used in large power plants however it is not advisable to be used in residential areas or for business establishments because it can exhaust more harmful elements or pollutant compared than that of natural fuel. It is more than advisable to use generators that use natural gas at home because of the safety it can provide.

Moreover, in comparison to renewable fuel generators, a natural fueled generator is more applicable if you would use it constantly. This is due to the fact that the source of this kind of generator can be found anywhere. On the other hand renewable fuel source like that from the wind and the sun is not constant because there are many factors that can affect its presence in the environment. However, renewable fuel generator is safer due to fact that the sources are just from the environment.

About the Author

Gas Pro 6 Burner Natural Gas CO2 Generator: J $706.35 16.5 cu.ft. CO2/hr. *CO2 can increase yield up to 50% in some cases *Most advance generator on the market - instantaneous electronic spark ignition *No standing pilot to waste gas and generate unwanted heat *Available in LP or Natural Gas, 6 burner or 12 burner models *Optional CO2-400 Infrared CO2 sensor/controller plugs directly into the Gas Pro and maintains any desired CO2 level set by user. Shows desired level as well as currnent level (ppm) on its LCD display CO2 (carbon dioxide) is needed by plants for proper growth. CO2 can be added by burning propane or natural gas - cheaper and easier to obtain than bottled CO2. The Gas Pro uses faster, more reliable, more efficient, electronic spark ignition. When the Gas Pro is turned on, spark and pilot gas start. When the pilot is lit, spark stops and main gas turns on and is lit by pilot. When the Gas Pro turns off, all gas turns off. Spark is better than standing/continuous pilot - they must be manually lit, burn all the time, and waste gas. Spark is faster and more reliable than a glow plug - no time needed for glow plug to heat up, spark ignites immediately. Both Propane and Natural Gas models available. Each have two sizes - a six burner and a twelve burner. The Propane model includes a regulator for connection to a propane tank. Gas hose (20 ft.) included with all models. Strong 18 gauge steel enclosure - powder coated for heat and rust resistance. Heat exchanger allows forced air cooling if desired. Plug the 120 volt power supply (included) into a controller or timer. Alternatively, the Gas Pro allows easy connection of a CO2 400 controller. Just plug CO2 400’s 10 ft. cable into the connector on the side of Gas Pro. Extension cable available. No separate power supply needed - it draws power from the Gas Pro. Includes easy to use display and controls to view and adjust ppm levels.

Gas Pro 6 Natural Gas Generator With CO2 400 Controller: J $1009.38 16.5 cu.ft. CO2/hr. *CO2 can increase yield up to 50% in some cases *Most advance generator on the market - instantaneous electronic spark ignition *No standing pilot to waste gas and generate unwanted heat *Available in LP or Natural Gas, 6 burner or 12 burner models *Optional CO2-400 Infrared CO2 sensor/controller plugs directly into the Gas Pro and maintains any desired CO2 level set by user. Shows desired level as well as currnent level (ppm) on its LCD display CO2 (carbon dioxide) is needed by plants for proper growth. CO2 can be added by burning propane or natural gas - cheaper and easier to obtain than bottled CO2. The Gas Pro uses faster, more reliable, more efficient, electronic spark ignition. When the Gas Pro is turned on, spark and pilot gas start. When the pilot is lit, spark stops and main gas turns on and is lit by pilot. When the Gas Pro turns off, all gas turns off. Spark is better than standing/continuous pilot - they must be manually lit, burn all the time, and waste gas. Spark is faster and more reliable than a glow plug - no time needed for glow plug to heat up, spark ignites immediately. Both Propane and Natural Gas models available. Each have two sizes - a six burner and a twelve burner. The Propane model includes a regulator for connection to a propane tank. Gas hose (20 ft.) included with all models. Strong 18 gauge steel enclosure - powder coated for heat and rust resistance. Heat exchanger allows forced air cooling if desired. Plug the 120 volt power supply (included) into a controller or timer. Alternatively, the Gas Pro allows easy connection of a CO2 400 controller. Just plug CO2 400’s 10 ft. cable into the connector on the side of Gas Pro. Extension cable available. No separate power supply needed - it draws power from the Gas Pro. Includes easy to use display and controls to view and adjust ppm levels.

Gas Pro 12 Natural Gas Generator With CO2 400 Controller: J $1158.55 33 cu.ft. CO2/hr. *CO2 can increase yield up to 50% in some cases *Most advance generator on the market - instantaneous electronic spark ignition *No standing pilot to waste gas and generate unwanted heat *Available in LP or Natural Gas, 6 burner or 12 burner models *Optional CO2-400 Infrared CO2 sensor/controller plugs directly into the Gas Pro and maintains any desired CO2 level set by user. Shows desired level as well as currnent level (ppm) on its LCD display CO2 (carbon dioxide) is needed by plants for proper growth. CO2 can be added by burning propane or natural gas - cheaper and easier to obtain than bottled CO2. The Gas Pro uses faster, more reliable, more efficient, electronic spark ignition. When the Gas Pro is turned on, spark and pilot gas start. When the pilot is lit, spark stops and main gas turns on and is lit by pilot. When the Gas Pro turns off, all gas turns off. Spark is better than standing/continuous pilot - they must be manually lit, burn all the time, and waste gas. Spark is faster and more reliable than a glow plug - no time needed for glow plug to heat up, spark ignites immediately. Both Propane and Natural Gas models available. Each have two sizes - a six burner and a twelve burner. The Propane model includes a regulator for connection to a propane tank. Gas hose (20 ft.) included with all models. Strong 18 gauge steel enclosure - powder coated for heat and rust resistance. Heat exchanger allows forced air cooling if desired. Plug the 120 volt power supply (included) into a controller or timer. Alternatively, the Gas Pro allows easy connection of a CO2 400 controller. Just plug CO2 400’s 10 ft. cable into the connector on the side of Gas Pro. Extension cable available. No separate power supply needed - it draws power from the Gas Pro. Includes easy to use display and controls to view and adjust ppm levels.

Gas Pro 12 Burner Natural Gas CO2 Generator: J $849.11 33 cu.ft. CO2/hr. *CO2 can increase yield up to 50% in some cases *Most advance generator on the market - instantaneous electronic spark ignition *No standing pilot to waste gas and generate unwanted heat *Available in LP or Natural Gas, 6 burner or 12 burner models *Optional CO2-400 Infrared CO2 sensor/controller plugs directly into the Gas Pro and maintains any desired CO2 level set by user. Shows desired level as well as currnent level (ppm) on its LCD display CO2 (carbon dioxide) is needed by plants for proper growth. CO2 can be added by burning propane or natural gas - cheaper and easier to obtain than bottled CO2. The Gas Pro uses faster, more reliable, more efficient, electronic spark ignition. When the Gas Pro is turned on, spark and pilot gas start. When the pilot is lit, spark stops and main gas turns on and is lit by pilot. When the Gas Pro turns off, all gas turns off. Spark is better than standing/continuous pilot - they must be manually lit, burn all the time, and waste gas. Spark is faster and more reliable than a glow plug - no time needed for glow plug to heat up, spark ignites immediately. Both Propane and Natural Gas models available. Each have two sizes - a six burner and a twelve burner. The Propane model includes a regulator for connection to a propane tank. Gas hose (20 ft.) included with all models. Strong 18 gauge steel enclosure - powder coated for heat and rust resistance. Heat exchanger allows forced air cooling if desired. Plug the 120 volt power supply (included) into a controller or timer. Alternatively, the Gas Pro allows easy connection of a CO2 400 controller. Just plug CO2 400’s 10 ft. cable into the connector on the side of Gas Pro. Extension cable available. No separate power supply needed - it draws power from the Gas Pro. Includes easy to use display and controls to view and adjust ppm levels.

CO2 Generator CD-6NG - 6 cu.ft per hour Natural Gas: J $527 Carbon Dioxide (CO2 ) is one of the easiest ways to accelerate plant growth. Plants grown with supplemental CO2 can produce up to 40% more flowers or fruit. A propane or natural gas CO2 generator is the most cost effective way to add CO2 to your environment. Many greenhouses use CO2 generators to boost CO2 levels safely and economically. Carbon dioxide generators operate by burning carbonaceous fuels such as propane or natural gas. The burners used in Green Air Products CO2 generators are specially designed to maximize the production of CO2 and minimize heat as a by-product. Green Air Products generators provide CO2 far more economically than any other means of enrichment. A constant burning pilot is used to ignite the gas when the generator is turned on. A thermocouple is used to monitor the pilot flame. If the pilot flame is lost, a safety valve will close so that unburned fuel will not be released into the enclosure. CO2 Generator operations may be automatically functioned according to actual ambient values when installed in conjunction with the CDMC(search CO2 Detection & Control System). The generators may be controlled with timers such as the Cyclestat 4P. This control device continually samples the level of carbon dioxide in the growing area and functions the generator whenever CO2 levels do not meet your predetermined values. Generators are easily installed, dependable and efficient. Transformer included. Operates on 110 VAC.

CO2 Generator CD-36NG - 36 cu.ft. per hour Natural Gas: J $735.25 Carbon Dioxide (CO2 ) is one of the easiest ways to accelerate plant growth. Plants grown with supplemental CO2 can produce up to 40% more flowers or fruit. A propane or natural gas CO2 generator is the most cost effective way to add CO2 to your environment. Many greenhouses use CO2 generators to boost CO2 levels safely and economically. Carbon dioxide generators operate by burning carbonaceous fuels such as propane or natural gas. The burners used in Green Air Products CO2 generators are specially designed to maximize the production of CO2 and minimize heat as a by-product. Green Air Products generators provide CO2 far more economically than any other means of enrichment. A constant burning pilot is used to ignite the gas when the generator is turned on. A thermocouple is used to monitor the pilot flame. If the pilot flame is lost, a safety valve will close so that unburned fuel will not be released into the enclosure. CO2 Generator operations may be automatically functioned according to actual ambient values when installed in conjunction with the CDMC(search CO2 Detection & Control System). The generators may be controlled with timers such as the Cyclestat 4P. This control device continually samples the level of carbon dioxide in the growing area and functions the generator whenever CO2 levels do not meet your predetermined values. Generators are easily installed, dependable and efficient. Transformer included. Operates on 110 VAC.

CO2 Generator CD-3NG - 3 cu.ft. per hour Natural Gas: J $369.75 Carbon Dioxide (CO2 ) is one of the easiest ways to accelerate plant growth. Plants grown with supplemental CO2 can produce up to 40% more flowers or fruit. A propane or natural gas CO2 generator is the most cost effective way to add CO2 to your environment. Many greenhouses use CO2 generators to boost CO2 levels safely and economically. Carbon dioxide generators operate by burning carbonaceous fuels such as propane or natural gas. The burners used in Green Air Products CO2 generators are specially designed to maximize the production of CO2 and minimize heat as a by-product. Green Air Products generators provide CO2 far more economically than any other means of enrichment. A constant burning pilot is used to ignite the gas when the generator is turned on. A thermocouple is used to monitor the pilot flame. If the pilot flame is lost, a safety valve will close so that unburned fuel will not be released into the enclosure. CO2 Generator operations may be automatically functioned according to actual ambient values when installed in conjunction with the CDMC(search CO2 Detection & Control System). The generators may be controlled with timers such as the Cyclestat 4P. This control device continually samples the level of carbon dioxide in the growing area and functions the generator whenever CO2 levels do not meet your predetermined values. Generators are easily installed, dependable and efficient. Transformer included. Operates on 110 VAC.

CO2 Generator CD-12NG - 12 cu.ft. per hour Natural Gas: J $476 Carbon Dioxide (CO2 ) is one of the easiest ways to accelerate plant growth. Plants grown with supplemental CO2 can produce up to 40% more flowers or fruit. A propane or natural gas CO2 generator is the most cost effective way to add CO2 to your environment. Many greenhouses use CO2 generators to boost CO2 levels safely and economically. Carbon dioxide generators operate by burning carbonaceous fuels such as propane or natural gas. The burners used in Green Air Products CO2 generators are specially designed to maximize the production of CO2 and minimize heat as a by-product. Green Air Products generators provide CO2 far more economically than any other means of enrichment. A constant burning pilot is used to ignite the gas when the generator is turned on. A thermocouple is used to monitor the pilot flame. If the pilot flame is lost, a safety valve will close so that unburned fuel will not be released into the enclosure. CO2 Generator operations may be automatically functioned according to actual ambient values when installed in conjunction with the CDMC(search CO2 Detection & Control System). The generators may be controlled with timers such as the Cyclestat 4P. This control device continually samples the level of carbon dioxide in the growing area and functions the generator whenever CO2 levels do not meet your predetermined values. Generators are easily installed, dependable and efficient. Transformer included. Operates on 110 VAC.

VCG-6 NG / Natural Gas Variable Output CO2 Generator: J $416.46 Carbon Dioxide / CO2 is critical for all plants. Normal atmospheric air around the world averages about 380 Parts-Per-Million (PPM.) When plants are provided higher levels of carbon dioxide, they can grow faster and larger. The best and most cost effective way to increase the CO2 level is by using a CO2 generator that burns either natural gas or propane. The VCG-6 has two models, the LP (propane) and an NG (Natural Gas) model. Both come complete with (2) clean burning brass burners pre-installed and the appropriate regulator & hose. For the smallest set-ups, the user can replace 1 of the 2 burners with the plug provided with the unit. That allows the unit to produce 3 cubic feet per hour instead of 6 cu ft / hr. Available in both Propane and Natural Gas Variable CO2 output from 3 to 6 cubic foot CO2 / Hr. Solid state electronic ignition control module eliminates the open pilot flame Tip-over switch shuts off the gas flow in the event the unit falls or tips over Unit comes standard with 2 brass burners pre-installed The burners are designed to burn clean and produce consistent blue flames Dual redundant low-voltage solenoid valves add a second layer of safety Comes complete with 12 foot hose and pressure regulator There are two different VCG-6 units, one is used for Propane (VCG-6LP) and one is used for Natural Gas (VCG-6NG). Below is the differences between the two units. Make sure you have selected the correct unit and are using the matching gas. VCG-6LP / Propane: Liquid Propane otherwise known as LP or Propane is stored in pressurized tanks of varying sizes. The gas exiting the pressurized tank must first be regulated to a very low pressure before it enters the gas burners. The standard for measuring the low pressure is inches of water column or '' WC. The VCG-6LP operates at 11'' WC or about 1/2 PSI. Once the gas is regulated down to the correct pressure, it enters the unit and flows through the brass burners. Each brass burner has been designed to produce approximately 3 cu ft of CO2 per hour. Each LP burner will also produce 2263 BTU of heat and quite a lot of water vapor along with the 3 cu ft of carbon dioxide. The Propane regulator provided with the unit MUST be used unless it is verified that the propane gas supply is already regulated to 11'' WC. The provided LP regulator is designed to connect directly to portable LP tanks. It also has a built-in safety function that limits the flow of gas to a very low level in the event of a large gas leak. VCG-6NG / Natural Gas: Natural Gas otherwise known as NG is piped directly into homes and businesses from an extensive pipeline system. The gas supply entering the building can vary from very low pressure (less than 1/4 PSI) to over 5 PSI. The natural gas provided to the VCG-6NG must first be regulated to a very low pressure before it enters the gas burners. The standard for measuring the low pressure is inches of water column or INCH /WC. Th

Gen-1 Natural Gas CO2 Generator with Electronic Ignition: HY $364 Gen-1 Natural Gas CO2 Generator with Electronic IgnitionCarbon Dioxide (CO2) is one of the easiest ways to accelerate plant growth. Plants grown with supplemental CO2 can produce up to 40% more flowers or fruit. A propane or natural gas CO2 generator is the most cost effective way to add CO2 to your environment. Many greenhouses use CO2 generators to boost CO2 levels safely and economically.C.A.P. has developed some of the safest and most reliable CO2 Generators. They are capable of producing between 3 and 26 cubic feet of CO2 per hour. C.A.P. manufactures 2 models, The GEN-1e and the GEN-2e. The GEN-1e is recommended for small to medium size areas up to 15’ x 15’. The GEN-2e is recommended for larger areas up to 30’ x 30.Both the GEN-1e and the GEN-2e units feature a Pilotless Electronic Ignition, instead of the traditional "pilot light." They both come with a standard "tip-over" switch will shut down the fuel to the main burner in the event the unit falls or tips over. The C.A.P. CO2 generators are constructed of powder coated steel enclosures that resist moisture, rust and discoloration. They will provide years of trouble-free operation. The GEN-1e and GEN-2e are manufactured in the USA using only AGA and/or UL listed components that are appropriate for use with both propane and natural gas. The units come complete with a low-pressure, in-line Natural gas regulator or the new Type1 style "no-tool-required" propane regulator that makes tank replacement easy. C.A.P. CO2 generators operate up to 100 degrees cooler than other competitive products. Both the GEN-1e and GEN-2e CO2 generators are expandable! This allows you to increase the unit`s capacity to produce CO2 simply by installing additional burners. Each burner increases the CO2 generating capacity by approximately 3 cubic feet per hour. The GEN-1e is capable of producing between 6 and 13 cubic feet of CO2 per hour. It comes standard with two burners, producing approximately 6 cubic feet per hour. You can add up to 2 additional burners, increasing the unit's capacity to up approximately 13 cubic feet of CO2 per hour.

Gen-2 Natural Gas CO2 Generator with Electronic Ignition: HY $503.1 Gen-2 Natural Gas CO2 Generator with Electronic Ignition Carbon Dioxide (CO2) is one of the easiest ways to accelerate plant growth. Plants grown with supplemental CO2 can produce up to 40% more flowers or fruit. A propane or natural gas CO2 generator is the most cost effective way to add CO2 to your environment. Many greenhouses use CO2 generators to boost CO2 levels safely and economically.C.A.P. has developed some of the safest and most reliable CO2 Generators. They are capable of producing between 3 and 26 cubic feet of CO2 per hour. C.A.P. manufactures 2 models, The GEN-1e and the GEN-2e. The GEN-1e is recommended for small to medium size areas up to 15’ x 15’. The GEN-2e is recommended for larger areas up to 30’ x 30.Both the GEN-1e and the GEN-2e units feature a Pilotless Electronic Ignition, instead of the traditional "pilot light." They both come with a standard "tip-over" switch will shut down the fuel to the main burner in the event the unit falls or tips over. The C.A.P. CO2 generators are constructed of powder coated steel enclosures that resist moisture, rust and discoloration. They will provide years of trouble-free operation. The GEN-1e and GEN-2e are manufactured in the USA using only AGA and/or UL listed components that are appropriate for use with both propane and natural gas. The units come complete with a low-pressure, in-line Natural gas regulator or the new Type1 style "no-tool-required" propane regulator that makes tank replacement easy. C.A.P. CO2 generators operate up to 100 degrees cooler than other competitive products. Both the GEN-1e and GEN-2e CO2 generators are expandable! This allows you to increase the unit`s capacity to produce CO2 simply by installing additional burners. Each burner increases the CO2 generating capacity by approximately 3 cubic feet per hour. The GEN-2e is capable of producing between 16 and 26 cubic feet of CO2 per hour. It comes standard with 5 burners, producing approximately 16 cubic feet of CO2 per hour. You can add up to 3 additional burners, increasing the unit’s capacity to up to approximately 26 cubic feet of CO2 per hour.

CO2 Generator: Natural Gas Expansion Burners for Gen-1/Gen-2: HY $23.4 Gen-1/Gen-2 NG Expansion Burners These are our expansion natural gas burners. Each burner will be individually packaged with an expansion burner, pillow pack of Anti-Seize, Hex wrench or removing cap on manifold and complete installation instructions.

VCG-27 NG / Natural Gas Variable Output CO2 Generator: J $577.96 Carbon Dioxide / CO2 is critical for all plants. Normal atmospheric air around the world averages about 380 PPM (Parts Per Million). When plants are provided higher levels of carbon dioxide, they can grow faster and larger. It is usually agreed by experts that 1500 PPM is beneficial to plants. Gas burning CO2 generators are the most effective way of producing CO2. Available in both Propane and Natural Gas Variable CO2 output from 6 to 27 cubic foot CO2 / Hr. Solid state electronic ignition control module eliminates the open pilot flame Tip-over switch shuts off the gas flow in the event the unit falls or tips over Unit comes standard with 10 brass burners pre-installed The burners are designed to burn clean and produce consistent blue flames Dual redundant low-voltage solenoid valves add a second layer of safety Comes complete with 12 foot hose and pressure regulator The magic behind the Variable CO2 of the VCG-27 is (2) burner control valves that provide gas only to the burners that are selected. The aluminum gas manifolds and brass burners inside the generator are connected to the selection valves. When the valve is opened, gas is allowed to flow to the burners connected to the valve. Valve A is connected to 5 burners and Valve B is connected to 3 burners. Activating the valves in up to four combinations provide the variable CO2 output of either 2, 3, 7 or 10 burners. The burner control valves are located on the end of the unit and are labeled A & B. Remember, more burners activated = more CO2 & more heat produced. With both valves turned OFF, there are 2 standard burners that will receive gas. Two burners is the lowest possible setting. The VGC-27 uses the newest and most advanced ignition controller available today. The module provides the spark to light the (2) pilot burners, and then allows the main burners to ignite only after the flame has been verified. This provides consistent & controlled starts. If the module senses the flame is not present, it shuts off the solenoid valves. Power On (Green LED) Indicates 24 volt power is supplied to the unit. Lock Out (Red LED) The Lock Out LED blinking indicates the ignition controller shut off the solenoid valves and the unit is locked out. Cycling the power switch Off & On will reset the error. Main Valve (Green LED) Indicates the ignition controller has activated the main solenoid and the unit is in operation. Pilot Valve (Yellow LED) When the power is switched On, the ignition controller will provide a spark for 5 seconds, During that time, the pilot solenoid is activated. The Pilot Valve LED indicates that the pilot solenoid has been activated. (Should be On during operation) Amps / Volts requirements 400 ma @ 24 VDC Propane pressure (VGC-27LP) 11'' WC / 2.8 kpa Natural Gas pressure (VGC-27NG) 4.5'' WC / 1.15 kpa Cu ft per hour / CO2 6-27 SCFH BTU Rating (Variable) LP 4,526 - 22,630 NG 5,534 - 27,670 VariableCO2 Modes 2 - 5 - 7 - 10

Gas Pro 12 Burner Liquid Propane CO2 Generator: J $849.11 40 cu.ft. CO2/hr. *CO2 can increase yield up to 50% in some cases *Most advance generator on the market - instantaneous electronic spark ignition *No standing pilot to waste gas and generate unwanted heat *Available in LP or Natural Gas, 6 burner or 12 burner models *Optional CO2-400 Infrared CO2 sensor/controller plugs directly into the Gas Pro and maintains any desired CO2 level set by user. Shows desired level as well as currnent level (ppm) on its LCD display CO2 (carbon dioxide) is needed by plants for proper growth. CO2 can be added by burning propane or natural gas - cheaper and easier to obtain than bottled CO2. The Gas Pro uses faster, more reliable, more efficient, electronic spark ignition. When the Gas Pro is turned on, spark and pilot gas start. When the pilot is lit, spark stops and main gas turns on and is lit by pilot. When the Gas Pro turns off, all gas turns off. Spark is better than standing/continuous pilot - they must be manually lit, burn all the time, and waste gas. Spark is faster and more reliable than a glow plug - no time needed for glow plug to heat up, spark ignites immediately. Both Propane and Natural Gas models available. Each have two sizes - a six burner and a twelve burner. The Propane model includes a regulator for connection to a propane tank. Gas hose (20 ft.) included with all models. Strong 18 gauge steel enclosure - powder coated for heat and rust resistance. Heat exchanger allows forced air cooling if desired. Plug the 120 volt power supply (included) into a controller or timer. Alternatively, the Gas Pro allows easy connection of a CO2 400 controller. Just plug CO2 400’s 10 ft. cable into the connector on the side of Gas Pro. Extension cable available. No separate power supply needed - it draws power from the Gas Pro. Includes easy to use display and controls to view and adjust ppm levels.

Gas Pro 6 Burner Liquid Propane CO2 Generator: J $706.35 20 cu.ft. CO2/hr. *CO2 can increase yield up to 50% in some cases *Most advance generator on the market - instantaneous electronic spark ignition *No standing pilot to waste gas and generate unwanted heat *Available in LP or Natural Gas, 6 burner or 12 burner models *Optional CO2-400 Infrared CO2 sensor/controller plugs directly into the Gas Pro and maintains any desired CO2 level set by user. Shows desired level as well as currnent level (ppm) on its LCD display CO2 (carbon dioxide) is needed by plants for proper growth. CO2 can be added by burning propane or natural gas - cheaper and easier to obtain than bottled CO2. The Gas Pro uses faster, more reliable, more efficient, electronic spark ignition. When the Gas Pro is turned on, spark and pilot gas start. When the pilot is lit, spark stops and main gas turns on and is lit by pilot. When the Gas Pro turns off, all gas turns off. Spark is better than standing/continuous pilot - they must be manually lit, burn all the time, and waste gas. Spark is faster and more reliable than a glow plug - no time needed for glow plug to heat up, spark ignites immediately. Both Propane and Natural Gas models available. Each have two sizes - a six burner and a twelve burner. The Propane model includes a regulator for connection to a propane tank. Gas hose (20 ft.) included with all models. Strong 18 gauge steel enclosure - powder coated for heat and rust resistance. Heat exchanger allows forced air cooling if desired. Plug the 120 volt power supply (included) into a controller or timer. Alternatively, the Gas Pro allows easy connection of a CO2 400 controller. Just plug CO2 400’s 10 ft. cable into the connector on the side of Gas Pro. Extension cable available. No separate power supply needed - it draws power from the Gas Pro. Includes easy to use display and controls to view and adjust ppm levels.

Gas Pro 6 Liquid Propane Generator With CO2 400 Controller: J $1009.38 20 cu.ft. CO2/hr. *CO2 can increase yield up to 50% in some cases *Most advance generator on the market - instantaneous electronic spark ignition *No standing pilot to waste gas and generate unwanted heat *Available in LP or Natural Gas, 6 burner or 12 burner models *Optional CO2-400 Infrared CO2 sensor/controller plugs directly into the Gas Pro and maintains any desired CO2 level set by user. Shows desired level as well as currnent level (ppm) on its LCD display CO2 (carbon dioxide) is needed by plants for proper growth. CO2 can be added by burning propane or natural gas - cheaper and easier to obtain than bottled CO2. The Gas Pro uses faster, more reliable, more efficient, electronic spark ignition. When the Gas Pro is turned on, spark and pilot gas start. When the pilot is lit, spark stops and main gas turns on and is lit by pilot. When the Gas Pro turns off, all gas turns off. Spark is better than standing/continuous pilot - they must be manually lit, burn all the time, and waste gas. Spark is faster and more reliable than a glow plug - no time needed for glow plug to heat up, spark ignites immediately. Both Propane and Natural Gas models available. Each have two sizes - a six burner and a twelve burner. The Propane model includes a regulator for connection to a propane tank. Gas hose (20 ft.) included with all models. Strong 18 gauge steel enclosure - powder coated for heat and rust resistance. Heat exchanger allows forced air cooling if desired. Plug the 120 volt power supply (included) into a controller or timer. Alternatively, the Gas Pro allows easy connection of a CO2 400 controller. Just plug CO2 400’s 10 ft. cable into the connector on the side of Gas Pro. Extension cable available. No separate power supply needed - it draws power from the Gas Pro. Includes easy to use display and controls to view and adjust ppm levels.

Gas Pro 12 Liquid Propane Generator With CO2 400 Controller: J $1158.55 40 cu.ft. CO2/hr. *CO2 can increase yield up to 50% in some cases *Most advance generator on the market - instantaneous electronic spark ignition *No standing pilot to waste gas and generate unwanted heat *Available in LP or Natural Gas, 6 burner or 12 burner models *Optional CO2-400 Infrared CO2 sensor/controller plugs directly into the Gas Pro and maintains any desired CO2 level set by user. Shows desired level as well as currnent level (ppm) on its LCD display CO2 (carbon dioxide) is needed by plants for proper growth. CO2 can be added by burning propane or natural gas - cheaper and easier to obtain than bottled CO2. The Gas Pro uses faster, more reliable, more efficient, electronic spark ignition. When the Gas Pro is turned on, spark and pilot gas start. When the pilot is lit, spark stops and main gas turns on and is lit by pilot. When the Gas Pro turns off, all gas turns off. Spark is better than standing/continuous pilot - they must be manually lit, burn all the time, and waste gas. Spark is faster and more reliable than a glow plug - no time needed for glow plug to heat up, spark ignites immediately. Both Propane and Natural Gas models available. Each have two sizes - a six burner and a twelve burner. The Propane model includes a regulator for connection to a propane tank. Gas hose (20 ft.) included with all models. Strong 18 gauge steel enclosure - powder coated for heat and rust resistance. Heat exchanger allows forced air cooling if desired. Plug the 120 volt power supply (included) into a controller or timer. Alternatively, the Gas Pro allows easy connection of a CO2 400 controller. Just plug CO2 400’s 10 ft. cable into the connector on the side of Gas Pro. Extension cable available. No separate power supply needed - it draws power from the Gas Pro. Includes easy to use display and controls to view and adjust ppm levels.

CO2 Generator Selene 1 LP Gas 2-4 Burner: J $389.26 The use of Carbon Dioxide (CO2) has been scientifically proven to increase the productivity of plants. By elevating CO2 to the proper levels (1000 ppm to 2000 ppm), you can accelerate your plant growth from 35% to 50% and increase your yield. The Selene series CO2 generators have been built to meet the highest quality and safety standards in the market today. The ease of use and dependability are what makes Titan Controls a leader in hydroponic technology! Products created for our industry, by our industry. The Selene 1 is for use in small (5' x 5')to medium sized (15' x 15') grow spaces. The unit comes pre-loaded with four(4) 'jet cap' burners and includes spare brass plugs to decrease CO2 production, if required. The Selene 2 is for use in larger (up to 30' x 30') grow spaces. The Selene CO2 generators come with: A Selene 1 or Selene 2 CO2 Generator, 12 foot LP rated gas hose with a regulation POL tank fitting, 120 Volt to 12 Volt A/C power adapter, #4 ceiling hook, steel chain to hang your Selene CO2 generator, a hex wrench and spare burner plugs. Selene Series CO2 generators help your plants reach their highest potential! Selene 1 - CO2 Generator Four(4) burners - Adjustable from 5,588 BTU's to 11,176 BTU's Provides from 6 cubic feet per hour to 12 cubic feet per hour Electronic Spark Ignition (ESI) - No pilot light necessary Safety 'tip over' switch shuts down gas source to Selene 1 in case it falls or gets knocked over Natural Gas conversion kit available from your Retailer Only the highest quality components are used Easy to operate Saves money vs. CO2 tanks 2 Amps/120 Volts/60 Hz 3 year warranty Selene 2 - CO2 Generator Manufacturer’s Instructions are online here: http://www.titancontrols.net/media/6231/selene1_instructions.pdf

CO2 Generator Selene 2 LP Gas 4-8 Burner: J $535.46 The use of Carbon Dioxide (CO2) has been scientifically proven to increase the productivity of plants. By elevating CO2 to the proper levels (1000 ppm to 2000 ppm), you can accelerate your plant growth from 35% to 50% and increase your yield. The Selene series CO2 generators have been built to meet the highest quality and safety standards in the market today. The ease of use and dependability are what makes Titan Controls a leader in hydroponic technology! Products created for our industry, by our industry. The Selene 1 is for use in small (5' x 5')to medium sized (15' x 15') grow spaces. The unit comes pre-loaded with four(4) 'jet cap' burners and includes spare brass plugs to decrease CO2 production, if required. The Selene 2 is for use in larger (up to 30' x 30') grow spaces. The unit comes pre-loaded with eight(8) 'jet cap' burners and includes spare brass plugs to decrease CO2 production, if required. The Selene CO2 generators come with: A Selene 1 or Selene 2 CO2 Generator, 12 foot LP rated gas hose with a regulation POL tank fitting, 120 Volt to 12 Volt A/C power adapter, #4 ceiling hook, steel chain to hang your Selene CO2 generator, a hex wrench and spare burner plugs. Selene Series CO2 generators help your plants reach their highest potential! Selene 2 - CO2 Generator Eight(8) burners - Adjustable from 11,176 to 22,352 BTU's Provides from 12 cubic feet per hour to 24 cubic feet per hour Electronic Spark Ignition (ESI) - No pilot light necessary Safety'tip over' switch shuts down gas source to Selene 2 in case it falls or gets knocked over Natural Gas conversion kit available from your Retailer Only the highest quality components are used Easy to operate Saves money vs. bottled CO2 2 Amps/120 Volts/60 Hz 3 year warranty Manufacturer’s Instructions are online here: http://www.titancontrols.net/media/2657/selene2_instructions.pdf

Generator $9.49 Generator

2005 Olympian G100F3S Generator $7500 Tandem Axle Trailer Mounted, Ford WSG-1068 Natural Gas Engine, Enclosure. There was no fuel supply at the time of inspection. The main components could not be operationally checked. The item appears generally complete.

NG4 CO2 Generator Natural Gas 4 Burner -12,000 BTU: J $747.15 Safety panels to avoid burning at the torch Safe, easy to use and highly energy efficient Safe electronic pilot: no manual starting button nor continuous flame Internal electronic control to avoid excessive heat and to turn off the unit in case of tipping over Dimensions: 16.5'' D x 20.5'' H x 9.5'' W

NG8 CO2 Generator Natural Gas 8 Burner - 24,000 BTU: J $823.65 Safety panels to avoid burning at the torch Safe, easy to use and highly energy efficient Safe electronic pilot: no manual starting button nor continuous flame Internal electronic control to avoid excessive heat and to turn off the unit in case of tipping over Dimensions: 16.5'' D x 20.5'' H x 9.5'' W

Wood Gas Generator $81.25 High Quality Content by WIKIPEDIA articles A wood gas generator often known as a gasifier, is a woodfueled gasification reactor mounted on an internal combustion engine, to provide a wood gas, a form of syngas. These devices are also known as gas producers.Gasification was an important and familiar 19th and early 20th century technology, and its potential and practical applicability to internal combustion engines were wellunderstood from the earliest days of their development. Town gas was produced from coal as a local business, mainly for lighting purposes, at least initially, and experience in the trade was widespread; most practicing technical people would know a good deal about it. When stationary internal combustion engines based on the Otto cycle became available (and especially after the Otto engines patent expired and entered the public domain), internal combustion engines began displacing steam engines as prime movers in many works requiring stationary motive power. Author: Surhone, Lambert M./ Tennoe, Mariam T./ Henssonow, Susan F. Binding Type: Paperback Number of Pages: 108 Publication Date: 2010/09/21 Language: English Dimensions: 6.00 x 9.02 x 0.26 inches

DEWALT DG7000 7,000 Watt Gas Generator $2199.99 7,000 Watt Gas Generator - DG7000. Wheel Kit. Handle Kit. Lifting Hook. Spark Plug Wrench

2006 Coleman PM401211 Generator - Unused $1400 9,500 Watts on Natural Gas, 11,200 Watts on Propane, 120-240 Volts, 1 Phase, Soft Start Circuit

Hitachi E43 4,300 Watt Portable Gas Generator with Honda GX Motor $899.99 4,300 Watt Portable Gas Generator with Honda GX Motor - E43

ALP040168 2.1mm Natural Gas $2.99 21mm Natural Gas Orifice to convert to natural gas

WEN 3500-watt Gas Generator $638.3 Brand: WENModel: 56352Dimensions: 24.4 inches long x 17.7 inches wide x 18.5 inches highWeight: 111 poundsMaterials: Metal, rubber, plasticColor: YellowStyle: PortableStability: Stand alone portable unitOutput: 3500 wattsEPA/CARB approved: EPA/No CarbPackage includes: Generator, spark plug wrench, wheel kit and manualUses: Portable powerLanguages: English, Spanish and english on product boxInstructions: Manual includedPower: 6.5-horsepower engine3500 surge watts, 3000 running watts4gallon fuel tankLow-oil automatic shutdownTwo 120-volt receptaclesOne 240/120 V NEMA L14-30 receptacleVoltage indicator lightsVoltage selector switchDC outletDigital hour meterSafety: Spark arrestor

Coal, Oil, and Natural Gas $36 Coal, Oil, and Natural Gas

DEWALT DXGN4500 4,500 Watt Gas Generator with Recoil Start $1599.99 4,500 Watt Gas Generator with Recoil Start - DXGN4500. Steel Frame with Lifting Hook

DEWALT DXGN7200 7,200 Watt Gas Generator with Electric and Recoil Start $1999.99 7,200 Watt Gas Generator with Electric and Recoil Start - DXGN7200. Steel Frame with Lifting Hook

DEWALT DXGN6000 6,000 Watt Gas Generator with Recoil Start $1749.99 6,000 Watt Gas Generator with Recoil Start - DXGN6000. Steel Frame with Lifting Hook

Halox Generator Is Often Used with Chlorine Gas for Asthma and Other Allergies $79.99 Peter Stackpole Halox Generator Is Often Used with Chlorine Gas for Asthma and Other Allergies - Premium Photographic Print

Deluxe Natural Gas $729 Broilmaster Series Deluxe Gas Grill Natural Gas